REMOVED: iLO 4 firmware version 2.20 is NO LONGER AVAILABLE for download due to an issue found when upgrading to version 2.20 that results in resetting iLO security settings to default values. Click the 'Obtain software' link to open the HP Support Center download web page for iLO 4 firmware version 2.22, which is the replacement for version 2.20.
· Any ProLiant server with iLO 4 when updating or downgrading the iLO 4 firmware version 2.50 through version 2.54. Upgrading from 2.50 and earlier to 2.55 this will not occur; however, after updating from iLO 4 firmware version 2.53 or firmware version 2.54 to firmware version 2…
For iLO 4 Firmware version 2.30 and onwards, it is a must to upgrade to HPQLOCFG v1.50. For iLO 4 Firmware versions below 2.30, iLO 2 and iLO 3, it is recommended to upgrade to HPQLOCFG v1.50. This version of HPQLOCFG supports iLO 4 firmware version 2.30 onwards when FIPS Mode or Enforce AES/3DES Encryption mode is enabled.
The component will update the iLO 4 firmware and reset the iLO 4 processor. Extract the firmware from the component. This will place the firmware image file, iLO4_yyy.bin (where yyy represents the firmware version) in the target directory. You now have these options: Login to iLO 4, navigate to the Update Firmware page, and update the firmware from there. Use the HP Lights-Out Configuration ...
· In some instances, HPE Integrated Lights-Out 4 (iLO 4) configuration data could potentially be reset to default values after an iLO firmware upgrade to iLO 4 Firmware Version 2.53 on HPE ProLiant Gen8 series servers. Therefore, iLO 4 Firmware Version 2.53 has been removed from hpe.com and has been replaced with iLO 4 Firmware Version 2.54.
The following problems have been resolved in iLO 2 version 2.01 firmware: iLO 2 v2.00 would not allow an HPSUM upgrade to future iLO 2 firmware releases. While iLO 2 is being rebooted, iLO 2 could stop responding after the physical Power Button was pressed to power-on an HP …
HP Lights-Out Online Configuration Utility for Windows x64 Editions. By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement. Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.
iLo 4 v2.54 update with iLo doesn't work Hello, I have download the latest version of iLo (v2..54), unpack cp032620.scexe and rename this file to ilo4_254.bin.
For iLO 4 Firmware versions below 2.30, iLO 2 and iLO 3, it is recommended to upgrade to HPQLOCFG v1.50. This version of HPQLOCFG supports iLO 4 firmware version 2.30 onwards when FIPS Mode or Enforce AES/3DES Encryption mode is enabled.
- HP ProLiant Gen 8 servers with iLO 4 2.00 or 2.02 might report an incorrect value for the temp1 sensor. - HP ProLiant Gen8 servers with iLO 4 2.00 or 2.02 might display an incorrectly lit FAN1 Systems Insight Display (SID) LED when no FAN1 is installed.
The only reason people get lost in thought is because it's unfamiliar territory.